• タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社

Materials Evaluations

English (United Kingdom)
You are here:   HomeMaterialsConductivity MeterSmart Probe 1020 & 1021

Smart Probe

Smart Probe 1020 & 1021

Print PDF

 

Dip Probe 1020

 

 

The Model 1020 fully immersible Conductivity Dip Probe is designed to work with ILIUM’s Model 2100 Conductivity Meter and is optimized for measuring ultra-low to low conductivities from 25 femto-S/cm to 2.5 micro-S/cm. It’s small size, sample independent cell constant, and easy to clean design make it ideal for laboratory, QC/QA, and process applications.

The probe can be disassembled for cleaning and reassembled in seconds with no change in the cell constant, providing complete reproducibility. This is an important advantage when measuring emulsions or particle dispersions, such as paints and inks, which often leave difficult to rinse particles or droplets deposited on the electrode surfaces. This makes the Model 1020 probe along with the Model 2100 ideal for the characterization of inks, paints, pharmaceutical and personal care formulations, resins, liquid toners, and other non-polar as well as polar fluid systems.

 

Flow-through Probe 1021

 

 

 

The Model 1021 Conductivity Flow-through Probe is the ideal solution for real-time conductivity monitoring of any liquid system where the conductivity is best or most conveniently measured in a flowing rather than static environment. The new probe works with Ilium’s Model 2100 ultra-low, ultra-wide range conductivity meter and can measure conductivities ranging from 2.5 micro-Siemens/cm (10-6) down to 25 femto-Siemens/cm (10-15). Applications include laboratory titrations, reactions, and controlled environment experiments; as well as other situations where static measurement of conductivity is not recommended, such as high purity water and other solvents.

The ability to measure conductivities over such a wide and low range makes the Model 1021 ideal for the characterization of inks, paints, pharmaceutical and personal care formulations, resins, liquid toners, and other non-polar as well as polar fluid systems. For the first time it is practical to track production processes and research experiments from an initial pure solvent through component addition and processing; or to use real-time conductivity measurements to monitor inline clean-in-place processes for solvent based systems, much as they are already used in aqueous systems.




 

 


 

Titan Technologies, K.K.

8-5-7-301 Minami-Senju, Arakawa-Ku, Tokyo 116-0003 Japan